PALL MALL 120GRIT 40CM SANDSCREEN TS400120

Stock Code:
TS400/120
Price:
$16.92

Description

This floor sanding sandscreen disc requires a Sandscreen Driver Pad to attach it to the pickle pad holder of rotary disc machines.
MORE is exactly what you'll get from Vacman's new and improved sandscreens. Our new state-of-the-art manufacturing process applies the grain and binder to our screens uniformly for unsurpassed strength and performance. These screens deliver 25% MORE cutting action and are 30% MORE durable than before. And with MORE grit and disc sizes to choose from, you'll score every time with the right screen. When it comes to wood floor refinishing don't just sit on the bench... get in the game.
Recommended Procedures for Restoring Wood Floors with Sandscreens
DRY SANDING METHOD
1) Place a #80 or #100 grit sandscreen disc under a ScreenSaver Driver pad. Dry disc sand the floor in the opposite direction boards are running. Be careful not to remove court lines. Remove residue by vacuuming or sweeping the floor in the same direction as the boards.
2) Place a #120 grit sandscreen disc under a ScreenSaver Driver pad. Dry disc sand the floor in the same direction as the boards.
3) Sweep and vacuum the floor, then tack rag thoroughly.
4) Apply finish according to the manufacturer’s recommendations.
5) If manufacturer recommends screening between coats, use a #150 or #220 grit sandscreen.
*For heavy build up and excessively worn floors, use steps 1- 5. For scuffed and lightly worn floors, skip step 1.
WET SCRUBBING METHOD
1) Apply a mild soap and water cleaning solution to a small area of the floor using an automatic scrubber. (DO NOT over-saturate the floor!)
2) Scrub area evenly using a #100 or #120 grit sandscreen disc driven by a ScreenSaver Driver pad.
3) Immediately pick up the cleaning solution with the automatic scrubber.
4) Thoroughly rinse with clean water using the automatic scrubber.
5) Allow the floor to dry thoroughly before applying finish according to the manufacturer’s recommendations.
6) If manufacturer recommends screening between coats, use a #150 or #220 grit sandscreen.
NEW FLOOR SANDING METHOD
1) Sand floors thoroughly with a drum and edge sander. Sweep or vacuum the floor thoroughly.
2) Place a #220 grit sandscreen disc under a ScreenSaver Driver pad held in place with a pad holder or under a brush. Sand surface evenly. Sweep or vacuum the floor thoroughly.
3) Disc sand the floor with a #100 or #120 grit sandscreen disc in the same direction as the boards.
4) Vacuum, then tack rag thoroughly.
5) Apply seal according to the manufacturer’s recommendations.
6) If manufacturer recommends screening between coats, use a #150 or #220 grit sandscree

Stock Level:
In Stock